L3HARRISFAST. FORWARD XL Two Way Portable Radio Chargers

Capabilities

XL 2-Bay Charger with battery capacity indication

The L3Harris XL 2-bay charger is designed to re-charge lithium batteries used with the XL Converge™ series of portable radios (XL 200P, XL 185P and XL 150P). The charger brings batteries to full capacity within 4 hours and features advanced technologies to maximize operational life.

Fast-charge LMR Li-Ion Charger

The XL 2-Bay Charger can accommodate a battery pack and a radio with battery still attached or two battery packs. Colored LED banks provide the user simultaneous charge level indications of installed batteries. The unit’s microprocessors monitor the charge rate to compensate for hot or cold, weak or defective batteries and line voltage variations. The charger can be located on a desk or other flat surface.

Desk and flat surface mount
Charges Li-Ion batteries in 4 hours or less
Provides microprocessor-controlled charging for long battery life and maximum battery performance
Charges batteries with or without the radio and speaker mic attached
Fast and accurate capacity indication

Premium Vehicular Charger

Mount in a vehicle or use on a desk.

Compatible with the XL Extreme™ and Converge series of portable radios (XL 400P, XL 200P, XL 185P and XL 150P)
Charges Li-Ion batteries in 4 hours or less
Provides microprocessor-controlled charging for long battery life and maximum battery performance
Charge batteries with or without the radio and speaker mic attached
Power supply kit includes AC adapter and cigarette lighter adapter

1-Bay XL Converge Portable Charger

Charge batteries with or without the radio.

Charge batteries in 4 hours or less
Not for use with NiCd and NiMH batteries
Model #: XL-CH4X

6-Bay Li-Ion Charger

Charge up to six batteries at once.

Charge batteries with or without the radio attached
Not for use with NiCd and NiMH batteries
Wall mount kit XL-CH5B sold separately
Model #: XL-CH5A

Frequently Asked Questions

What is the typical lead time for gas turbine overhaul services?

The lead time for gas turbine overhaul services ranges from 6 to 14 weeks, depending on the damage assessment, parts availability, and whether hot-section repairs are required. Expedited options may reduce this by 30%.
Do you provide customizations for legacy turbine control systems?

Yes, we retrofit legacy systems (e.g., GE Frame 5, Siemens V94.2) with modern digital controllers, typically completing hardware integration within 4-8 weeks. Software migration requires additional validation time.
How often should industrial gas turbines undergo performance testing?

We recommend annual performance testing under ISO 3977-2 standards. Critical applications (e.g., offshore platforms) may require semi-annual tests with emissions compliance checks.
Are your radiation-hardened (rad-hard) semiconductors compliant with MIL-PRF-38535?

All rad-hard devices (e.g., FPGA, ADC) are QML Class V certified under MIL-PRF-38535 and tested to MIL-STD-883 Method 1019 for SEU tolerance. Full qualification reports are available upon request.
What temperature ranges do your military-grade ICs support?

Our ASICs and power management ICs operate across -55°C to +175°C ambient temperatures, with derating curves provided in military temperature range (MTR) datasheets.
Are PMA parts interchangeable with OEM components?

Our PMA parts (e.g., actuators, sensors) hold FAA/EASA Form 1 certification and match OEM form/fit/function. Installation requires SB/MB documentation per FAA AC 23.1529.
What traceability standards do you follow for aircraft fasteners?

All NAS/MS fasteners include full DNA traceability: melt source (AMS 2301), heat/lot numbers, and AS9100-compliant MTRs with ultrasonic test reports.
How do you handle urgent AOG (Aircraft on Ground) requests?

AOG orders ship within 4 hours for stocked items (FAA-PMA, EASA Part 21G). Non-stock critical parts trigger priority manufacturing with 72-hour max turnaround.