HGuide o360 Inertial/GNSS Navigator

The HGuide o360 is a single-card INS/GNSS, all attitude Inertial/GNSS Navigator designed for any platform where high- performance navigation data is required in an ultra-low SWAP package. HGuide o360 INS/GNSS navigator contains a powerful dual-antenna, multifrequency, multi-constellation, RTK capable GNSS receiver, and Honeywell’s leading- edge i300 IMU technology and a high- grade calibrated Magnetometer.

Honeywell’s sensor fusion expertise blends the IMU, GNSS and Magnetometer data to deliver an accurate, robust navigation service to your application with all the functionalities that you need, even through GNSS outages. The HGuide o360 output data includes timestamped position, velocity, angular rate, linear acceleration, roll, pitch and heading information at 100Hz. In dual-antenna mode, the device supports GNSS-based heading measurements and initialization.

Key Honeywell Advantages:

Honeywell advanced navigation algorithms for air, land and sea tailored to industrial applications
Full INS/GNSS capability in a common GNSS form factor
Proven reliability and dependability. MTBF >50,000 hours
Onboard NTRIP client and accepts RTCM3 corrections
Multiple, configurable communication ports including UART, Ethernet and CAN
Direct input of quadrature pulses from Distance Measurement Instrument (DMI)
Compatible with most commercial LiDAR sensors
Onboard Data Logging available for IMU and GNSS data suitable for Post Processing
Raw IMU Data Rate up to 600Hz, GNSS 5Hz
Compatible with Honeywell HGuide Post Processing suite
The HGuide o360 inertial navigation system is not ITAR- controlled. Its Export Control Classification Number (ECCN) is 7A994 and is generally available free of an export license

Frequently Asked Questions

What is the typical lead time for gas turbine overhaul services?

The lead time for gas turbine overhaul services ranges from 6 to 14 weeks, depending on the damage assessment, parts availability, and whether hot-section repairs are required. Expedited options may reduce this by 30%.
Do you provide customizations for legacy turbine control systems?

Yes, we retrofit legacy systems (e.g., GE Frame 5, Siemens V94.2) with modern digital controllers, typically completing hardware integration within 4-8 weeks. Software migration requires additional validation time.
How often should industrial gas turbines undergo performance testing?

We recommend annual performance testing under ISO 3977-2 standards. Critical applications (e.g., offshore platforms) may require semi-annual tests with emissions compliance checks.
Are your radiation-hardened (rad-hard) semiconductors compliant with MIL-PRF-38535?

All rad-hard devices (e.g., FPGA, ADC) are QML Class V certified under MIL-PRF-38535 and tested to MIL-STD-883 Method 1019 for SEU tolerance. Full qualification reports are available upon request.
What temperature ranges do your military-grade ICs support?

Our ASICs and power management ICs operate across -55°C to +175°C ambient temperatures, with derating curves provided in military temperature range (MTR) datasheets.
Are PMA parts interchangeable with OEM components?

Our PMA parts (e.g., actuators, sensors) hold FAA/EASA Form 1 certification and match OEM form/fit/function. Installation requires SB/MB documentation per FAA AC 23.1529.
What traceability standards do you follow for aircraft fasteners?

All NAS/MS fasteners include full DNA traceability: melt source (AMS 2301), heat/lot numbers, and AS9100-compliant MTRs with ultrasonic test reports.
How do you handle urgent AOG (Aircraft on Ground) requests?

AOG orders ship within 4 hours for stocked items (FAA-PMA, EASA Part 21G). Non-stock critical parts trigger priority manufacturing with 72-hour max turnaround.